Elavon PAX terminal A80 registration 

In this article you will learn how to register and connect you PAX A80 terminal to the Corksy POS

Step 1: Retrieve IP address from PAX A80 terminal.

1. Turn on terminal and enter Settings Password
   • A80 Settings Password - 9876 or pax9876@@
2. Connect the terminal to the wireless network where the terminal will be used.
3. Obtain IP Address
   1. Settings → About Device → IP Address
   2. 

Step 2: Add IP Address and Port to PAX terminal settings on POS

1. Add the obtained IP Address
2. Add the Port number: 10009
3. Check SSL 
4. Save

Step 3: Install certificate on POS iPad device (sent to store contact email)

1. Send certificate to the device you will use/connect to the terminal 
2. Accept on device and install 
3. If using iPad, Settings > Profile > continue through until you see verified (green checkmark) 

1. Once verified > General > About > all the way to bottom > Certificate Trust Settings

1. Continue to ensure it has root access (Enable full root access)
2. Complete